Cork Floor Install SWMS
Install of cork floor tiles or planks. Adhesive-down or floating click systems over level subfloor. Includes substrate prep, tile cutting, edge sealing, surface coating where required.
SWMS variants reference your state’s WHS legislation. Instant download after payment.
Installation of cork floor tiles or planks over prepared subfloor using adhesive-down or floating click systems. Work includes substrate preparation, tile cutting, edge sealing and surface coating. Triggers WHS Regulation 2025 duties for hazardous chemical exposure, manual handling and construction work safety planning under Part 6.3.
Hazards identified
3 hazards covered, sorted by priority.
Respiratory irritation, dermatitis, CNS effects
Knee bursitis, lumbar strain injuries
Deep hand and finger lacerations
Control measures
Hierarchy-of-controls order: elimination → substitution → isolation → engineering → administrative → PPE.
- 1Use low-VOC adhesives; mechanical ventilation and A1P2 respirators per SDS and AS/NZS 1715.
- 2Rotate tasks, use knee pads, limit continuous kneeling to 30 minutes between breaks.
- 3Cut-resistant gloves, retractable safety blades, cut away from body on stable surface.
Applicable Codes of Practice
Adhesive vapour exposure, SDS and ventilation duties
Kneeling, repetitive tile handling risk controls
High-Risk Construction Work triggered
Adhesive solvent vapours accumulate in enclosed rooms during cork bonding and coating.
HRCW SWMS required before work starts under WHS Reg s291.
What you receive
- ✓Editable DOCX SWMS tailored to cork flooring installation
- ✓State-specific WHS legislation schedule
- ✓Hazard and risk register
- ✓Worker sign-on register
Related legislation
- WHS Act 2011
- WHS Regulation 2025 Part 7.1 Hazardous Chemicals
- AS/NZS 1715 Respiratory Protective Equipment