Wind & Renewables SWMS
Australia's renewable energy construction boom is creating demand for SWMS that address hazards unique to wind, solar, and battery energy storage systems. Wind turbine erection combines high-altitude work (nacelle heights of 100 m+ on Class 5 towers), crane lifts exceeding 1,000 t capacity, confined space entry into nacelles and towers, and energised HV electrical commissioning. Utility-scale solar introduces arc-flash risk from DC strings at up to 1,500 V — well above the model WHS Reg HRCW Reg 291 Cat. 11 threshold. BESS installations are governed by AS/NZS 5139:2019 (battery safety) and the new NSW COP for BESS (2024). This category covers wind turbine construction, nacelle and blade installation, solar farm string installation and DC commissioning, BESS installation and commissioning, EV charging infrastructure installation, and small hydropower and pumped hydro. Each SWMS references AS/NZS 5139, AS/NZS 3000, the relevant state network operator's requirements, and the HRCW categories under Reg 291.
9 SWMS in this category
9 ready-to-buy editable DOCXs · 8 state variants per product · delivered within 24 hours of payment.
🔋BESS Commissioning SWMS
Battery energy storage system commissioning — HV DC energisation, arc-flash, thermal runaway controls, state-based BESS permit requirements,…
🌬️BESS Lithium-Ion Battery Installation & Commissioning SWMS
Grid-scale battery energy storage installation — DC arc-flash, thermal runaway management, fire suppression integration, commissioning grid-…
🌬️EV Fast Charger DC Installation SWMS
Commercial DC fast charger installation — 50-350 kW units. DC isolation, mass concrete pad foundation, traffic management at servo or commer…
🔋Lithium-Ion Battery Storage SWMS
Storage, handling, and management of lithium-ion battery systems — thermal runaway prevention, fire suppression, transport, disposal, and em…
🌬️Utility-Scale Solar Farm Construction SWMS
Utility solar farm construction — pile-driving, table installation, panel placement, inverter and combiner box wiring. DC arc-flash on energ…
🌬️Wind & Renewables SWMS
CIH-reviewed Wind & Renewables SWMS for utility-scale construction and maintenance — wind turbine erection, blade repair, GWO climb, utility…
🌬️Wind Turbine Blade Repair (Composites) SWMS
On-tower blade repair from rope access or BIP — composite (CFRP/GFRP) sanding RCS-equivalent dust hazard, resin sensitiser, lightning down-c…
🌬️Wind Turbine Erection SWMS
Wind turbine tower section, nacelle, hub, and blade erection by crawler crane. Critical lift planning, weather window management, GWO crane …
🌬️Wind Turbine Maintenance Climb SWMS
Wind turbine tower internal climb, nacelle work, rotor lock-out for inspection. GWO Working at Heights and First Aid certification mandatory…
Need a renewables SWMS?
AS/NZS 5139 referenced, HRCW compliant, editable DOCX. Instant download.
View all Wind & Renewables SWMS →