OH Consultant
Metal Fabrication›SWMS

Stick Welding SWMS

Stick welding generates the highest fume emission rates of any common arc welding process. The flux coating on stick electrodes produces a dense fume plume containing iron oxide, manganese, fluoride compounds, and silicates. E7018 low-hydrogen electrodes, the most widely used structural electrode in Australia, contain significant manganese in both the wire core and flux coating. With the manganese WEL dropping to 0.02 mg/m³ in December 2026, stick welding operations will require aggressive fume extraction and respiratory protection to achieve compliance. This template maps controls to the binding Welding Processes Code of Practice effective 1 July 2026 under Section 26A.

$35 AUD✓ Instant Download Available

SWMS variants reference your state's WHS legislation. Instant download after payment.

Legal Requirements

regulation

WHS Regulation 2025 Part 7.1 — Hazardous Chemicals

hrcw category

Hot work near flammable atmosphere

code of practice

Welding Processes (binding 1 July 2026 under Section 26A)

section 26a binding

Yes — effective 1 July 2026. Non-compliance is admissible as evidence of breach.

Hazards

HazardConsequenceLikelihood
High-volume welding fume containing manganese and fluoridesManganism, fluorosis, chronic lung diseaseAlmost Certain
Flux fume irritation to eyes and respiratory tractChemical conjunctivitis, occupational asthmaLikely
Electric shock from electrode holder and return clampElectrocution, cardiac arrestUnlikely
Burns from slag spatter and hot electrode stubsSecond and third degree burnsLikely
Fire ignition from slag droplets and electrode stubsWorkshop fire, structural damagePossible
UV radiation and arc flashPhotokeratitis, skin burnsLikely

Controls (Hierarchy of Controls)

Install local exhaust ventilation with at least 0.5 m/s capture velocity at the fume source for all stick welding
Use powered air-purifying respirators for sustained stick welding due to high fume generation rates
Substitute lower-manganese electrode classifications where structural requirements permit
Implement slag disposal procedures to prevent fire ignition from hot slag and electrode stubs
Provide insulated electrode holders in good condition and verify return clamp connections before welding
Use welding screens and curtains to contain UV radiation and protect adjacent workers
Conduct personal exposure monitoring for manganese and fluoride after any process change
Include fluoride biological monitoring in the health surveillance program for regular stick welders

Recent Prosecutions

KML Auto Parts Pty Ltd$375,000

Apprentice suffered severe burns in a welding incident with inadequate training records and supervision for the assigned task.

2022 — SafeWork NSW v KML Auto Parts Pty Ltd [2022]

Orica Australia Pty Ltd$1,200,000

Workers exposed to metal fume without adequate ventilation or health monitoring, resulting in occupational lung disease.

2024 — SafeWork NSW v Orica Australia Pty Ltd [2024]

What Your SWMS Must Include

✓Electrode classification and manganese content for each consumable used
✓LEV specifications and maintenance schedule for stick welding stations
✓RPE selection based on fume generation rate and assigned protection factor
✓Slag and stub disposal procedures to manage fire risk
✓Health surveillance schedule including respiratory function and fluoride biological monitoring

Need a compliant Stick Welding SWMS?

Our WHS consultants build process-specific SWMS that address the high fume generation rates and incoming WEL changes for your stick welding operations.

Contact Us