Access Control System Installation SWMS
Safe Work Method Statement covering the key hazards and control measures for access control system installation.
SWMS variants reference your state’s WHS legislation. Instant download after payment.
Installation of access control systems involves mounting card readers, electric strikes, magnetic locks and control panels, plus low-voltage cabling and 240V power connections. This electrical work triggers WHS Regulation 2025 SWMS requirements where energised circuits, working at height on doorframes, or live testing creates risk of electric shock or serious injury.
Hazards identified
3 hazards covered, sorted by priority.
Electric shock, cardiac arrest, fatality
Falls causing fractures or head injury
Musculoskeletal strain and crush injuries
Control measures
Hierarchy-of-controls order: elimination → substitution → isolation → engineering → administrative → PPE.
- 1Isolate, lock out and test dead before work; verify with tested voltage indicator per AS/NZS 4836.
- 2Use Australian-Standard rated ladders or platforms with three points of contact and spotter below.
- 3Two-person lift cabinets over 20kg; use trolleys for batteries and pre-cut cable lengths.
Applicable Codes of Practice
Mandatory wiring standards for fixed power and ELV connections
Isolation, testing and live work procedures
High-Risk Construction Work triggered
Connecting controllers and door hardware to live 240V supply and ELV circuits energised on adjacent boards.
SWMS mandatory before work starts under WHS Reg 291; penalties up to $30,000.
What you receive
- ✓Editable DOCX SWMS template ready for site-specific customisation
- ✓State-specific WHS legislation and Codes of Practice schedule
- ✓Pre-populated hazard register aligned to access control installation
- ✓Worker sign-on register for SWMS consultation and acknowledgement
Related legislation
- WHS Act 2011 s.19 Primary duty of care
- WHS Regulation 2025 Part 4.7 Electrical safety
- WHS Regulation 2025 r.291 High risk construction work SWMS