📡
Boom Lift SWMS Template
Safe Work Method Statement for boom lift / cherry picker operation for elevated access
HRCW: Work at height (risk of falling more than 2 metres)
✓ WHS Reg compliant✓ Pre-filled hazards & controls✓ Preview free, export PDF
What This SWMS Covers
This SWMS covers boom lift (articulating and telescopic) operation for elevated work access on construction and maintenance sites.
Who Needs This SWMS
EWP operators (WP class licence for boom lifts >11m), maintenance workers, painters, electricians using boom lifts for access
Key Hazards & Control Measures
| Hazard | Risk Level | Control Measures | Hierarchy |
|---|---|---|---|
| Falls from the platform | Fatal | Full-body harness with short lanyard attached to anchor point in basket, guardrails intact, no climbing on guardrails | PPE / Engineering |
| Boom lift tipover | Fatal | Setup on firm level ground, outriggers fully extended (where fitted), do not exceed platform load rating, wind speed limits observed | Engineering / Administrative |
| Electrocution (contact with overhead powerlines) | Fatal | Safe approach distances, spotter for work near powerlines, non-conductive boom preferred near electrical | Administrative / Engineering |
| Crushing / entrapment (boom and overhead structures) | Fatal | Operator to maintain clear view of travel path, spotter for blind spots, secondary guarding / anti-entrapment devices | Engineering / Administrative |
PPE Requirements
●Full-body harness with short restraint lanyard
●Hard hat (AS/NZS 1801)
●Safety boots (AS/NZS 2210)
●High-visibility vest
Frequently Asked Questions
Build Your Boom Lift SWMS Now
Pre-filled hazards and controls for boom lift work. Preview free, export when ready.